Go to store

Hydraulic Fluid Conditioning Rentals

Request
Information

REQUEST INFORMATION

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

L&H's Hydraulic Conditioning Fleet of Rentals and Rent-to-own

70-90% of all hydraulic system failures are caused by contaminants in the fluid, which can decrease operating efficiency and life of a hydraulic system. We offer products for testing the hydraulic fluid in your machines:

  • Fluid conditioning equipment available for rent
  • Get start-up training and assistance with our rental machines
  • Lease to own option
Portable Service Units
  • Easily transported
  • Detects amount of particulate and water contamination
  • Integrated pump built in – samples can be taken regardless of whether they’re in the pressure line or from a reservoir/ tote
  • Displays a 3 digit ISO contamination evel as well as water content as percent saturation
  • Data can be obtained using a USB drive and stored to a PC device
Standard Filter Carts
  • Can be used for both fluid transfer and kidney loop filtration
  • 14 GPM flow rate with dual elements
  • Can use 2 stage particulate filtration or water removal then particulate 115 VAC power allows plug in to wall outlet
  • Micron sizes available in 3, 5, 10, 20 or water removal element
  • Viscosity ratings up to 1000 SUS
Automatic Filter Carts
  • Same components as standard cart with integrated particle counter and water sensor
  • 9 GPM flow rate
  • Can set target ISO level and cart will filter until getting 5 consecutive readings at that level, then automatically shut off
  • Can obtain data from cart via USB drive
Small Dehydrators
  • Designed for use to remove both free and dissolved water from hydraulic fluids
  • Automatic operation – set target fluid conditions and cart runs until conditions met then shuts off
  • 15 GPM flow rate
  • 110 VAC power supply allows for use in wall outlet
  • 1000 SUS max fluid Viscosity
  • 1” JIC line connections
Large Dehydrators
  • Designed for use to remove both free and dissolved water from hydraulic fluids
  • Automatic operation – set target fluid conditions and cart runs until conditions met then shuts off
  • 2 sizes - 15 GPM or 22 GPM flow rates available
  • 460 VAC power supply
  • 2500 SUS max fluid viscosity
  • 1.5” JIC line connections
What is Hydraulic Fluid Contamination?
  • Any substance that is foreign to a fluid system and degrades its optimum performance
  • Can exist as a gas, liquid, or solid
  • Accelerates component wear, resulting in seizure of parts, higher fluid temperatures, leakage, and loss of control
  • Decreases system’s service life and efficiency
  • Accelerates oxidation of the fluid and causes chemical breakdown of additives
What Are Some Causes of Contamination?
  • New systems often have contaminants left behind from manufacturing and assembly operations
  • Inefficient air breathers and worn cylinder rod seals during normal operation
  • Airborne contaminants entering during routine servicing and maintenance
  • Friction and heat internally generating contaminants

Fluid Conditioning Brochure

Copyright © 2012 – 2024 Livingston & Haven. All Rights Reserved.